So normally this time of year I try to get out the festive garland, tree, ornaments, and most importantly the lights on the tree. This year due to our compressed time schedule and imminent baby deadline, Christmas lights have a taken a new turn. My mom coming to visit in 5 days has also made Bryan hurry a little bit more, since the guest bedroom and bath are currently without any power.
Bryan has been working diligently on some of the electrical work in the house. We have as part of the last few projects had the main line to the house upgraded, new 200 amp box, new outlets on the 1st floor, and all new electrical on the 3rd floor. So really a good portion of the work is complete. Just the second floor and the ceiling in the first floor remain as remnants of the old work. This nice pretty yellow wire, is how all the new stuff is supposed to look.
The picture to the right shows some of this old work. For those who haven't experienced the wonders of knob and tube wiring this may seem even stranger, but this is a weird combination. This is actually a junction between the old knob and tube, and conventional, but old, wiring that also existed in the house. We are pretty close to getting all of the old wiring out of the house, but when you do see some of this old stuff, it is still surprising that the lights have actually worked for the last 100 years, and that we haven't burned the place down yet.
So the last couple of weekends have focused on new lights, and new outlets. As with all projects sometimes they take an unexpected turn. This one is no exception. They do create some unexpected results, that can also be kind of funny in a sort of sad way. This next picture falls into this category. It is kind of hard to tell, but this is a look into our old bathroom, which for the last week hasn't had power to the lights. So there is an extension cord from another room with a table lamp on the toilet. I should say it does create a nice ambiance in the room at least. With Bryan's extreme diligence it does seem that this situation will be remedied by Thursday when my mom shows up. While we can deal with bizarre situations in the house, it isn't nice to subject guests to our chaos. I did tell her to bring slippers, and a thick robe, as there is no real way to clean most of the areas under construction, but in theory she won't have to trip over the saws-all and table lamp in the bathroom for Christmas!
What we are doing:
In what spare time we have, we decided to spend it (and our savings) on remodeling our rowhouse in South Philly. When we purchased our casa it was a 3 story, 5 bedroom, 1 bath that hadn't been touched in 50+ years. It's currently a 4 bed, 2 bath construction site with so much more to do it's hard to believe.
We use this blog to mark progress, say hi to friends and family, rant about the process of remodeling, and try to have some fun along the way.
- Bryan and Christina
Saturday, December 20, 2008
Tuesday, December 9, 2008
Third floor walkthrough video
As an appendix to my "Epilogue" post, I'm attempting to upload a video tour I created this morning. We used some crappy digital recorder that Angie's List gave us for complaining a lot or something. The point is that the lighting is suspect and the volume might be low, so please forgive me.
Next time I'll create one in a Bollywood style or something. The video is like 3 mins, unedited and about 13MB. Enjoy.
Next time I'll create one in a Bollywood style or something. The video is like 3 mins, unedited and about 13MB. Enjoy.
Epilogue | Reveal | Pictures
It's kind of weird to type this, but as of last night (December 8th 2008 to be accurate) Christina and I slept in our third floor suite. Not only that, but the rooms are done* and life can move on to the other 3 months of projects waiting for us.
I won't use this post to rehash the months and months of events that have gone int creating our third floor suite**, that's what all of the links are for to the right. But I am going to post some pictures of the final product along with just a couple shots of what it was like back in late April when we started really getting down and dirty with this project. So right before the demo was done we had something like this on the right.
Which was promptly wrapped up to create one big space that had no more plaster walls, no dropped plaster ceilings, and no closet. Like the picture on the left.
So you get the point. These pics are from previous posts, but it's fun to look back at them from time to time to really remember what kind of rabbit hole we really decided to jump down.
I'm posting pictures of the finished spaces below without much commentary. I think over the past posts we've beat that horse so if you want to know what is what then by all means post a comment. Plus Christina LOVES COMMENTS! Again, sorry for the spotty lens...
Over the past 4 months we've had various paid "professionals" come and go along with me finding out that not only can I create software pretty well, but I think I prefer to create things with my hands even more. I have to say that being forced to learn on the fly various skill sets that you didn't know you could muster up was awesome and something that in the end I'm grateful for.
All of that reminds of Ferris Bueller's Day Off and the great exchange between Cameron and the parking garage attendant:
>You guys got nothing to worry about, I'm a professional.
>A professional what?
Of course there's another side to that coin, and that would be that when I took over most of the work, it meant more money in tools, days off of work, material (cause you know you need to learn how to make that mitre cut at least twice) and sanity. We also quickly realized that while Christina's day job as "Senior Designer" means that she's great at thinking up cool looking ideas, someone in the conversation needs to be the practical person saying "yeah, but how to you expect that to work?".
Also, on at least 3 occasions, we really screwed up the order of things which we'll never do again I hope.
A partial list of dont's when doing something like this:
I couldn't sleep last night at all, but I wasn't sure if it was because of the "moment" or if it was due to our new bedroom feeling foreign and like a hotel room at first. I mean new surroundings, new bed...even new sheets and duvet cover. It was a lot to process.
I'll say that I'm ready for at least one weekend away from house work. But then again, I'm addicted to the stuff and at this point I' don't know what to do with my time that isn't either at the Depot or working on the house. Is there anything else left in life!?!
Now for the disclaimers:
* The tub is going to require a "professional" (great) to get the feet fixed so I can hook it back up to the plumbing. The banister is obviously missing spindles still, but that is part of the first floor/second floor renovation slated to be completed by March 2009**.
** I don't call this a "Master Suite" and I won't. I find that term hearkening back to the plantation slave era and I'm not into that. I don't get how and why that term was ever popularized, but it's a pretty crap term if you ask me.
*** That March 2009 date is hard because well...we're having a baby (girl supposedly) on or near April 6th. Yeah us! I tried to find an ultrasound picture to Photoshop with a little tool belt and hard hat, but what we have look like Rorschach tests instead. What can you do.
We have to thank the following friends for their help with this project: Niko, Jen, Graham, Andrea (and Logan!), Cat, Anna (the roman shades and duvet are awesome!) and everyone else who gave an opinion or encouragement. Seriously, it meant a lot to us and we owe you all big time.
So yeah, I guess now we start the next chapter of our house. That's the wrap up of the ongoing electrical chapter, with a hopeful tale of fresh drywall in 75% of the remaining spaces, and even the introduction of a new character to the plot.
It's about to get VERY interesting around here for sure. Cheers!!!
- Bryan
I won't use this post to rehash the months and months of events that have gone int creating our third floor suite**, that's what all of the links are for to the right. But I am going to post some pictures of the final product along with just a couple shots of what it was like back in late April when we started really getting down and dirty with this project. So right before the demo was done we had something like this on the right.
Which was promptly wrapped up to create one big space that had no more plaster walls, no dropped plaster ceilings, and no closet. Like the picture on the left.
So you get the point. These pics are from previous posts, but it's fun to look back at them from time to time to really remember what kind of rabbit hole we really decided to jump down.
I'm posting pictures of the finished spaces below without much commentary. I think over the past posts we've beat that horse so if you want to know what is what then by all means post a comment. Plus Christina LOVES COMMENTS! Again, sorry for the spotty lens...
Over the past 4 months we've had various paid "professionals" come and go along with me finding out that not only can I create software pretty well, but I think I prefer to create things with my hands even more. I have to say that being forced to learn on the fly various skill sets that you didn't know you could muster up was awesome and something that in the end I'm grateful for.
All of that reminds of Ferris Bueller's Day Off and the great exchange between Cameron and the parking garage attendant:
>You guys got nothing to worry about, I'm a professional.
>A professional what?
Of course there's another side to that coin, and that would be that when I took over most of the work, it meant more money in tools, days off of work, material (cause you know you need to learn how to make that mitre cut at least twice) and sanity. We also quickly realized that while Christina's day job as "Senior Designer" means that she's great at thinking up cool looking ideas, someone in the conversation needs to be the practical person saying "yeah, but how to you expect that to work?".
Also, on at least 3 occasions, we really screwed up the order of things which we'll never do again I hope.
A partial list of dont's when doing something like this:
- Don't paint before the hardwoods are in. Just resist. That's why drop cloths were invented, and touching up paint will never happen.
- Don't assume that anyone knows what they are doing. This sounds both cynical and obvious, but whatever. Just because you pay a "professional" to do something doesn't mean it's not a clusterf*$k when they leave. It ALWAYS will be. Check on the work before they "professional" leaves the house, and be straight if it's not up to par. It's your money.
- Don't install plumbing fixtures before you're truly ready. We installed the tub before the window trim was done as well as the baseboards and getting those in was a nightmare.
- Don't freak out if something isn't installing like you might see on TOH or similar tv show. This is the real world, and you have to be crafty A LOT.
- Don't make a trip to the ER part of your project. That sucked.
- If you have to hire out and you're blessed (like we are now with our cement guy) to have that ONE contractor that is great and knows people...go with the guys he knows. We've saved a ton of money, time, and aggravation after we started talking to Joe's various trade guys. All of them have been great.
- Use Angie's list or something similar for reference only. They tended to be pricey for what we were wanting, but they were a good baseline for prices on that higher end.
- Get yourself a decent workshop space that you don't care how much mess is created. We just don't have a lot of room being in a rowhouse, but when I did create my shop space it was a lifesaver.
- If you're completely gun shy about doing something yourself, then don't press the issue. It's OK to hire out. Like I was terrified to refinish the floor I laid down, and instead spent $400 on a pro and it was great. The peace of mind was worth the money without a doubt.
- Right tool, for the right job. Period, end of story. If you are needing to do something that requires some special tool, or have to nail in hundreds of feet of trim, rent of buy what you need. Done.
I couldn't sleep last night at all, but I wasn't sure if it was because of the "moment" or if it was due to our new bedroom feeling foreign and like a hotel room at first. I mean new surroundings, new bed...even new sheets and duvet cover. It was a lot to process.
I'll say that I'm ready for at least one weekend away from house work. But then again, I'm addicted to the stuff and at this point I' don't know what to do with my time that isn't either at the Depot or working on the house. Is there anything else left in life!?!
Now for the disclaimers:
* The tub is going to require a "professional" (great) to get the feet fixed so I can hook it back up to the plumbing. The banister is obviously missing spindles still, but that is part of the first floor/second floor renovation slated to be completed by March 2009**.
** I don't call this a "Master Suite" and I won't. I find that term hearkening back to the plantation slave era and I'm not into that. I don't get how and why that term was ever popularized, but it's a pretty crap term if you ask me.
*** That March 2009 date is hard because well...we're having a baby (girl supposedly) on or near April 6th. Yeah us! I tried to find an ultrasound picture to Photoshop with a little tool belt and hard hat, but what we have look like Rorschach tests instead. What can you do.
We have to thank the following friends for their help with this project: Niko, Jen, Graham, Andrea (and Logan!), Cat, Anna (the roman shades and duvet are awesome!) and everyone else who gave an opinion or encouragement. Seriously, it meant a lot to us and we owe you all big time.
So yeah, I guess now we start the next chapter of our house. That's the wrap up of the ongoing electrical chapter, with a hopeful tale of fresh drywall in 75% of the remaining spaces, and even the introduction of a new character to the plot.
It's about to get VERY interesting around here for sure. Cheers!!!
- Bryan
Monday, December 8, 2008
Friday Night Fun
So you know that you have reach a ripe old age, when it suddenly becomes not a only a good idea, but fun to stay in and put together furniture. This first image is just one of the bags necessary to create an heirloom quality dresser from IKEA. The first dresser took us about an hour and a half, which was a bit discouraging......but we plodded along, and did the second one in half that time. I joked with Bryan that if the economy continues to go south, I would hire him out to all the other poor suckers in the IKEA parking lot, and send him home to put together their furniture for a nominal fee. He was not keen on this idea, and the fact that we still had a bed to get together I decided not to poke the bear too much!
The bed actually isn't from IKEA, and it has 2 drawers for off season storage underneath, which is great. Between the 2 dressers, the bed, and 5 closets, I am going to have to go shopping in order to actually fill all the space. There are worse things I suppose.
(sorry for the spotty camera lens, we're having technical difficulties)
Sorry to the avid readers, but going back to Indy for T-Day did dampen our speed a bit on getting this place together. As you can see from this last picture we did get pretty close last weekend to moving up there. The mirror finally got on the wall, another purchase from June. I think it has been in every room of the house on its journey upstairs. It even went upstairs and then back down in the same day at least 1 time. Now it is in its final home, and we are close to making this room look not so much like a construction site an more like a livable room. We promise to not go so long next time!
The bed actually isn't from IKEA, and it has 2 drawers for off season storage underneath, which is great. Between the 2 dressers, the bed, and 5 closets, I am going to have to go shopping in order to actually fill all the space. There are worse things I suppose.
(sorry for the spotty camera lens, we're having technical difficulties)
Sorry to the avid readers, but going back to Indy for T-Day did dampen our speed a bit on getting this place together. As you can see from this last picture we did get pretty close last weekend to moving up there. The mirror finally got on the wall, another purchase from June. I think it has been in every room of the house on its journey upstairs. It even went upstairs and then back down in the same day at least 1 time. Now it is in its final home, and we are close to making this room look not so much like a construction site an more like a livable room. We promise to not go so long next time!
Thursday, November 13, 2008
Out with the Fire Meany!
It's me Christina! Bryan's hand isn't fighting the good fight that well, so I have a story to tell you ....
So for the last few weeks we have been battling random plumbers to get the heat actually on in this house. We had plans with 4 different guys to actually do the work. Started with 2 guys who seemed interested, then never returned phone calls (I was beginning to feel like a girl without a date to the prom). Then came the company who showed up twice, never to do what they said, and then to tell us the work we had done by our old plumber was wrong, and that we would have to pay for all of it to be ripped out and redone, at a super low price of $1400. Mind you it was 45 degrees outside for the high that day, and being a blonde woman at home alone, obviously I was going to get out my check book and pay him immediately. Needless to say, later that day I was on the phone with a 4th plumber, Kevin!
Kevin over last week and got here a bit late, as he has a day job and this was side work. He and another guy got the 2 new Runtal radiators installed on the third floor, with minor installation issues (like Bryan having to pry off the apron of a window for the radiator to fit) along the way. But still, they began to fill and bleed the system about 9:45pm which worked for us.
There is apparently a pressure reducing valve on the system, with an adjustable screw. Of course this comes loose, water sprays out, and all the water drains into the basement. Due to our previous experiences my response is, "At least it is the basement". So the guys takes off for the night before he collapses from starvation and exhaustion, and a bit defeated by the house. It was then 10:30 PM.
They return on Tuesday to try again. Filling the system, bleeding radiators, then our pressure release valve decides to release; water sprays out, and all the water drains into the basement. The guys replace the valve, fill the system, bleed the radiators, and try to light the boiler. Alas, it won't fire.......the guys take off after a late night as neither of them know much about boiler controls. What can you do?
So Kevin promises to find someone who knows controls to come over, I think he was more upset that the heat wasn't on than me. The hitch: yesterday, we get home go down to the basement, and find all the water has drained out of the system; for those playing at home this is 3 full systems of water in the basement. Apparently the problem was that the pressure reducing value (that reduces water pressure from the street pressure of 60 psi to a "boiler friendly" 30 psi) was stuck on. I'm sure you're all saying "well what does that mean?" at this moment. Well I'll tell you: It means that the system doesn't know it's full and KEEPS TRYING TO FILL FOR HOURS AT 60 PSI. For those who aren't plumbers and who haven't lived through this, it means that you get water shooting out of a little valve deal. And it won't stop until your husband has Kevin on the phone and figures out how to shut the valve. Super.
So today, Kevin and a "control friend" show up, and replace what I think is the only remaining old piece of our boiler and promptly re-fill the system. They bled the radiators, and miraculously CREATED HEATED!!! It has only been 6 weeks since we tried to schedule the first guy...don't forget that. Only 6 weeks.
I am not sure if we need both a water idol and a fire idol at this point to bury in the backyard? I guess all this plays into the fact that we are about to go back to Indiana for T-Day, and the last few trips right before we left something water related has decided to crap out. First the water heater exploded, then the washing machine, and now the boiler has all new parts! We did replace the dishwasher, check out our first ever blog for the highlights, so we hope we're covered there.
So we are almost ready for our trip! As long as Bryan's hand is healed enough to drive.....
Which is a whole different (and expanding) story....
So for the last few weeks we have been battling random plumbers to get the heat actually on in this house. We had plans with 4 different guys to actually do the work. Started with 2 guys who seemed interested, then never returned phone calls (I was beginning to feel like a girl without a date to the prom). Then came the company who showed up twice, never to do what they said, and then to tell us the work we had done by our old plumber was wrong, and that we would have to pay for all of it to be ripped out and redone, at a super low price of $1400. Mind you it was 45 degrees outside for the high that day, and being a blonde woman at home alone, obviously I was going to get out my check book and pay him immediately. Needless to say, later that day I was on the phone with a 4th plumber, Kevin!
Kevin over last week and got here a bit late, as he has a day job and this was side work. He and another guy got the 2 new Runtal radiators installed on the third floor, with minor installation issues (like Bryan having to pry off the apron of a window for the radiator to fit) along the way. But still, they began to fill and bleed the system about 9:45pm which worked for us.
There is apparently a pressure reducing valve on the system, with an adjustable screw. Of course this comes loose, water sprays out, and all the water drains into the basement. Due to our previous experiences my response is, "At least it is the basement". So the guys takes off for the night before he collapses from starvation and exhaustion, and a bit defeated by the house. It was then 10:30 PM.
They return on Tuesday to try again. Filling the system, bleeding radiators, then our pressure release valve decides to release; water sprays out, and all the water drains into the basement. The guys replace the valve, fill the system, bleed the radiators, and try to light the boiler. Alas, it won't fire.......the guys take off after a late night as neither of them know much about boiler controls. What can you do?
So Kevin promises to find someone who knows controls to come over, I think he was more upset that the heat wasn't on than me. The hitch: yesterday, we get home go down to the basement, and find all the water has drained out of the system; for those playing at home this is 3 full systems of water in the basement. Apparently the problem was that the pressure reducing value (that reduces water pressure from the street pressure of 60 psi to a "boiler friendly" 30 psi) was stuck on. I'm sure you're all saying "well what does that mean?" at this moment. Well I'll tell you: It means that the system doesn't know it's full and KEEPS TRYING TO FILL FOR HOURS AT 60 PSI. For those who aren't plumbers and who haven't lived through this, it means that you get water shooting out of a little valve deal. And it won't stop until your husband has Kevin on the phone and figures out how to shut the valve. Super.
So today, Kevin and a "control friend" show up, and replace what I think is the only remaining old piece of our boiler and promptly re-fill the system. They bled the radiators, and miraculously CREATED HEATED!!! It has only been 6 weeks since we tried to schedule the first guy...don't forget that. Only 6 weeks.
I am not sure if we need both a water idol and a fire idol at this point to bury in the backyard? I guess all this plays into the fact that we are about to go back to Indiana for T-Day, and the last few trips right before we left something water related has decided to crap out. First the water heater exploded, then the washing machine, and now the boiler has all new parts! We did replace the dishwasher, check out our first ever blog for the highlights, so we hope we're covered there.
So we are almost ready for our trip! As long as Bryan's hand is healed enough to drive.....
Which is a whole different (and expanding) story....
Sunday, November 2, 2008
"I'm Back in the Saddle Again"
So it's officially been 1 week and 1 hour since I had my "incident" with the chop saw, and I'm 80% back in action. First, off many thanks for the nice messages and emails from family, friends, and stranger in the interwebs, it helped out immensely.
I won't rehash all of what Christina wrote last week. On a side note, when we got back from the ER she ran upstairs to document what happened before I even know what was going on. I mean she had her post started within 30 minutes of walking back in the door and helping me get situated. Part of me secretly thinks that her and the chop saw conspired to get more blog hits for 3 days. I wouldn't put it past her...but I digress.
So I cut my hand with the saw. I preformed the "wiggle your finger and pray hard they're there" thing in the car to the ER a couple times to myself as to not panic Christina any more than she was. 5 fingers to start with, and 5 in the end. The ER folks said I was FRIGGING (I'm trying to keep this post PG) lucky that I missed my thumb and forefinger tendons. They did tests before stitching me up to make sure that I had full movement. That was a huge relief as I'm a software development manager by day, and I need my fingers. That's 2 for 2 baby! Without posting any of the gory pictures I've been keeping I have one of where my cut was with a little (bad) photoshopping to illustrate where I did the damage.
The small line on the top is where I got my finger, and the one on the bottom is where I got my thumb knuckle. Think the start and end of the saw blade...without getting too graphic.
So that's that. I would say my hand is healing really well, but then I'd be pretending to be a doctor. So...I'll say that it doesn't hurt anymore, but the stitches are TIGHT since the cut was wide and really jagged. So I feel a "pulling" sensation when I make a fist or something equally stupid.
On Saturday I had the idea to work/finish the baseboards this weekend so that it was all out of my life for good. Needless to say I was a bit gun shy yesterday morning with the first few cuts, but I just went slow and really made safely the priority over "gittin' er done". Of course that's how it should be EACH AND EVERY TIME anyone uses any saw, but after so many times it's just white noise.
Anyway, I wrapped up the base caps yesterday and I bit today (I couldn't work more than a couple hours without a break since my hand would ache a bit). I took a couple pictures tonight of the baseboards just for a bit of reference. They ended up blurry for some reason, so I apologize. (note to the Boss: time for that new SLR right?!?!).
The base caps proved to be hard to cope for me. I think with the limited range of motion I have in my left hand right now and my utter lack of patience this weekend, it just didn't work out. So I reasoned that since there are only approx 5 inside corners that aren't in a closet, and the real work are the 14 some outside corners...that I'd just miter the base caps and pray for the best. Well Jeebus was listening to my sinful self because the insides worked out perfectly for the most part. The two that have small gaps were fixed when I caulked the baseboards today. VIOLA! The picture on the right shows a span of baseboard with the base cap and the caulk applied to hide the curvy walls. I'll touch up the wall paint after the trim is all painted. In like 2 years I'm sure.
The picture on the right shows one of my lingering buckets of joint compound. I actually used that today to fill in some unsightly gaps in the window trim. It's really hard to explain, but rest assured that none of it was my doing. It was a combination of how the ex-contractor installed "the box" for each window and that the Boss wanted the curved part of the window trim to be flush with the bowed edge of the boxes (thanks to the install...meh).
Well that means there's a gap. My solution: lightweight joint compound. The pictures below show the windows with the first coat joint compound applied just a bit ago. I'll sand them tomorrow after work and apply the second coat. Hopefully it all looks seemless, but who knows.
I have no clue why that last pic on the right (two windows) has "spots" on the walls. Part of me wants to race up there to see if they are in fact mysteriously on the walls or not. The other part of me says "why on EARTH does it matter at this point, plus you have chips and french onion dip". I think the second part of has the sound reasoning at this moment.
I guess that's it for now. Christina is at a baby shower far away, so I'm settling in to watch the Colts play tonight. So if you're the church going type, light a candle for them. They need it. Oh, also I celebrated the Phillies being WORLD F*#KING CHAMPIONS (my homage to Chase "I'm druuuuunk at the parade" Utley) for a few days last week which was great. I missed the parade because of you know...having a job...but since we live a block off of the parade route, the party was all night Friday.
Good stuff. Thanks again to everyone for the messages last week.
- Bryan
I won't rehash all of what Christina wrote last week. On a side note, when we got back from the ER she ran upstairs to document what happened before I even know what was going on. I mean she had her post started within 30 minutes of walking back in the door and helping me get situated. Part of me secretly thinks that her and the chop saw conspired to get more blog hits for 3 days. I wouldn't put it past her...but I digress.
So I cut my hand with the saw. I preformed the "wiggle your finger and pray hard they're there" thing in the car to the ER a couple times to myself as to not panic Christina any more than she was. 5 fingers to start with, and 5 in the end. The ER folks said I was FRIGGING (I'm trying to keep this post PG) lucky that I missed my thumb and forefinger tendons. They did tests before stitching me up to make sure that I had full movement. That was a huge relief as I'm a software development manager by day, and I need my fingers. That's 2 for 2 baby! Without posting any of the gory pictures I've been keeping I have one of where my cut was with a little (bad) photoshopping to illustrate where I did the damage.
The small line on the top is where I got my finger, and the one on the bottom is where I got my thumb knuckle. Think the start and end of the saw blade...without getting too graphic.
So that's that. I would say my hand is healing really well, but then I'd be pretending to be a doctor. So...I'll say that it doesn't hurt anymore, but the stitches are TIGHT since the cut was wide and really jagged. So I feel a "pulling" sensation when I make a fist or something equally stupid.
On Saturday I had the idea to work/finish the baseboards this weekend so that it was all out of my life for good. Needless to say I was a bit gun shy yesterday morning with the first few cuts, but I just went slow and really made safely the priority over "gittin' er done". Of course that's how it should be EACH AND EVERY TIME anyone uses any saw, but after so many times it's just white noise.
Anyway, I wrapped up the base caps yesterday and I bit today (I couldn't work more than a couple hours without a break since my hand would ache a bit). I took a couple pictures tonight of the baseboards just for a bit of reference. They ended up blurry for some reason, so I apologize. (note to the Boss: time for that new SLR right?!?!).
The base caps proved to be hard to cope for me. I think with the limited range of motion I have in my left hand right now and my utter lack of patience this weekend, it just didn't work out. So I reasoned that since there are only approx 5 inside corners that aren't in a closet, and the real work are the 14 some outside corners...that I'd just miter the base caps and pray for the best. Well Jeebus was listening to my sinful self because the insides worked out perfectly for the most part. The two that have small gaps were fixed when I caulked the baseboards today. VIOLA! The picture on the right shows a span of baseboard with the base cap and the caulk applied to hide the curvy walls. I'll touch up the wall paint after the trim is all painted. In like 2 years I'm sure.
The picture on the right shows one of my lingering buckets of joint compound. I actually used that today to fill in some unsightly gaps in the window trim. It's really hard to explain, but rest assured that none of it was my doing. It was a combination of how the ex-contractor installed "the box" for each window and that the Boss wanted the curved part of the window trim to be flush with the bowed edge of the boxes (thanks to the install...meh).
Well that means there's a gap. My solution: lightweight joint compound. The pictures below show the windows with the first coat joint compound applied just a bit ago. I'll sand them tomorrow after work and apply the second coat. Hopefully it all looks seemless, but who knows.
I have no clue why that last pic on the right (two windows) has "spots" on the walls. Part of me wants to race up there to see if they are in fact mysteriously on the walls or not. The other part of me says "why on EARTH does it matter at this point, plus you have chips and french onion dip". I think the second part of has the sound reasoning at this moment.
I guess that's it for now. Christina is at a baby shower far away, so I'm settling in to watch the Colts play tonight. So if you're the church going type, light a candle for them. They need it. Oh, also I celebrated the Phillies being WORLD F*#KING CHAMPIONS (my homage to Chase "I'm druuuuunk at the parade" Utley) for a few days last week which was great. I missed the parade because of you know...having a job...but since we live a block off of the parade route, the party was all night Friday.
Good stuff. Thanks again to everyone for the messages last week.
- Bryan
Tuesday, October 28, 2008
The Fire Meany says: "DIY"
So we have been progressing on the house, but why is it so difficult to actually find someone, other than my now handy husband/contractor, to do any actual work? Particularly with plumbers, what is so difficult to do?
Let me back up a little bit. In May, on the hottest day of the summer, we started our new construction project giddy with delight at the daily work of our contractor. Slowly this fell apart, and we started to see some flaws in the general work quality and accuracy, which ultimate led to him walking off the job. Fine. Great.
Now the coldest day of the year rolls around, and we still don't have heat. 2 new radiators were to be installed as part of the plumbers contract. They have been floating around the house since June waiting for their new home. Tried to get 2 different guys out over the last 2 weeks to no avail. Bryan stayed home on Friday waiting for guy #3 only to have a guy show up and say, "I was just here to fix a leak, I can't do an install". Great. Today I come home at noon to wait for the same company to come again and do the install. Too bad they weren't actually planning to install the radiators, but just to look around and estimate. Great. Now in addition to no heat, he tells me that we have 1/2" rough in work tied into the 3/4" system, which won't get enough water to the 3rd floor to properly heat. Also, Bryan looked at the install sheet for the radiators, and they in fact REQUIRE the 3/4" supply. Great.
What part of this wasn't clear to the first plumber, who we paid specifically for this work? Was the store out of 3/4" copper that day? Did they just not want to spend the extra money? What would possibly make that seem like a good idea?
With any luck, a friend from work will save the day with his relatives who are plumbers, but if not I might just try to conjure the Fire Meany to live in the living room until Spring. I think that would be easier than finding a plumber to show up, do what you expect, and not have thoroughly empty pockets at the end. Great.
Let me back up a little bit. In May, on the hottest day of the summer, we started our new construction project giddy with delight at the daily work of our contractor. Slowly this fell apart, and we started to see some flaws in the general work quality and accuracy, which ultimate led to him walking off the job. Fine. Great.
Now the coldest day of the year rolls around, and we still don't have heat. 2 new radiators were to be installed as part of the plumbers contract. They have been floating around the house since June waiting for their new home. Tried to get 2 different guys out over the last 2 weeks to no avail. Bryan stayed home on Friday waiting for guy #3 only to have a guy show up and say, "I was just here to fix a leak, I can't do an install". Great. Today I come home at noon to wait for the same company to come again and do the install. Too bad they weren't actually planning to install the radiators, but just to look around and estimate. Great. Now in addition to no heat, he tells me that we have 1/2" rough in work tied into the 3/4" system, which won't get enough water to the 3rd floor to properly heat. Also, Bryan looked at the install sheet for the radiators, and they in fact REQUIRE the 3/4" supply. Great.
What part of this wasn't clear to the first plumber, who we paid specifically for this work? Was the store out of 3/4" copper that day? Did they just not want to spend the extra money? What would possibly make that seem like a good idea?
With any luck, a friend from work will save the day with his relatives who are plumbers, but if not I might just try to conjure the Fire Meany to live in the living room until Spring. I think that would be easier than finding a plumber to show up, do what you expect, and not have thoroughly empty pockets at the end. Great.
Sunday, October 26, 2008
Blood, Sweat, and Tears
First off your friendly blogger has been sidelined due to a run-in with a not so friendly chop saw, so you are stuck with me at least for a bit. NOTE TO PARENTS: We are back from the ER with all the appropriate fingers, tendons, and critical parts; just minus a little blood. Actually all the people that saw Bryan said that he was quite lucky and should be just fine in 7-10 days when the 8 stitches come out. Now for the gory details.....
I was downstairs poking around on Angie's List just about to put a nasty rating up for a our long gone contractor when I hear Bryan running down the stairs and he yells, "Its time to go, get the keys!" Immediately realizing what this means and in a bit of a panic I grab the important things: car keys, Bryan's wallet with his insurance card and manage to get flip-flops instead of slippers on my feet just as he meets me at the bottom of the 2 flights of stairs he has come down. Off we go! At least I was somewhat clean and dressed, which is negotiable on a sunday afternoon.....
In the car he begins to explain that he didn't chop his hand off, but instead had just finished a cut with the chop saw and as the blade was beginning to slow down he reached to move the moulding cap a bit to early and scraped his hand across the still slightly spinning blade. Now another NOTE FOR PARENTS: He can move all his fingers with no tendon damage, and nothing was cut off. He did manage to turn the web between his thumb and first finger a bit closer to hamburger, but the doctor was able to stitch it up nicely.
Now Bryan has a recent tetanus shot, eventually a scar to show his hard work, and a healthy fear of all moving metal saw blades. This last picture shows the beginnings of the base cap mouldings that he was working on before "the incident", everyone should comment on how great they look, and how impressive it is that he has actually now shed blood for the project. I think he wins on the blood and sweat portions of this game, and I still win on the tears portion.
I was downstairs poking around on Angie's List just about to put a nasty rating up for a our long gone contractor when I hear Bryan running down the stairs and he yells, "Its time to go, get the keys!" Immediately realizing what this means and in a bit of a panic I grab the important things: car keys, Bryan's wallet with his insurance card and manage to get flip-flops instead of slippers on my feet just as he meets me at the bottom of the 2 flights of stairs he has come down. Off we go! At least I was somewhat clean and dressed, which is negotiable on a sunday afternoon.....
In the car he begins to explain that he didn't chop his hand off, but instead had just finished a cut with the chop saw and as the blade was beginning to slow down he reached to move the moulding cap a bit to early and scraped his hand across the still slightly spinning blade. Now another NOTE FOR PARENTS: He can move all his fingers with no tendon damage, and nothing was cut off. He did manage to turn the web between his thumb and first finger a bit closer to hamburger, but the doctor was able to stitch it up nicely.
Now Bryan has a recent tetanus shot, eventually a scar to show his hard work, and a healthy fear of all moving metal saw blades. This last picture shows the beginnings of the base cap mouldings that he was working on before "the incident", everyone should comment on how great they look, and how impressive it is that he has actually now shed blood for the project. I think he wins on the blood and sweat portions of this game, and I still win on the tears portion.
Saturday, October 25, 2008
A pocket door and baseboards. It's getting serious around here!
Hello interwebs people. LOLZ. So Friday and Saturday were both baseboard 101 for me. After reading another Tom "my Lord and Savior" Silva step by step baseboard install, I felt sufficiently ready for the task. Plus there's no way that it was going to be more difficult that the window sill and the window trim. I opted to not go crazy with biscuit joints and all of that highfalutin' stuff that Tom recommends since I have not used a biscuit joiner since the 8th grade and I'm lazy.
In designing the third floor space, I'm convinced that my wife went with the designed part of her brain, and not the practical construction side. Because a sqaure(ish) room is perfect for a first time baseboard installer. Not the mish-mash of closets and intertwining walls. Because, damn....there were TONS of cuts needed. (The design part won out, because the whole house had 2 legitimate closets in 11 rooms prior to the renovation, I admit adding 5 closets in 2 rooms might be a bit lopsided the other way, but you can never have too many closets right? - C)
Anyway, I've added a couple of shots of the baseboards that the boss took. Note that the artsy picture that has my knee pads (EVERYONE needs knee pads when doing baseboards, hardwood install, and tile...PERIOD) I had just placed the two pieces together. So that unsightly gap in the joint isn't really there. I just think that needs to be said for the record.
Really the hard part of the baseboards ended up being the outer mitered joints...obviously. Most of them weren't perfect 45 degrees which is normal. But it's just the shaving off material and trying over and over gets old.
Anyway, tomorrow I'll be adding the base cap to the top of what I've done so far. Honestly, I think that since the main pieces were added and the base cap follows that...it can't be too bad right? I think I totally jinxed everything just with that thought.
I also trimmed out the pocket door frame today and hung the door. The trimming part is about 95% complete with just the "jam" (a ripped 1x8) opposite of the door opening to nail in. Not a big deal. I'll end up priming and painting all of the new door trim when I do the same for the windows and baseboards.
The door has been in our living room SINCE MAY as we had a great thought of using a glass paneled door as our pocket door. It's a full sized door which proved to be a slight issue when actually installing the darn thing. I ended up enlisting the help of the boss and ripping the bottom of the door on the table saw. That made the height perfect, and then just pryed off a 3/8th inch piece added to the side for whatever reason. Totally worked.
I've gotten the thing mounted and now I have to figure out how to get the door to stop swaying back and forth. Of course I have no faith in what our former contractor did, and I can't find the installation instructions to save my life. So it looks like it'll be trial and error. Gee, imagine that.
Funny thing I finally noticed tonight. In the picture above with the door closed, you see three switches next to it in the bedroom. Those are actually the lights for the bathroom...in the bed room space. When I realized this I asked the boss and of course she knew it would be like that. Now, I'm not worried about it, but it's funny that I didn't really think of something like that between the two spaces until there was a door there. Not the wood to tile transition, the door frame...nothing else. Anyway, I found it interesting that I JUST NOW noticed it.
So I guess that's it for today. Not too bad for like 10 hours of work.
In designing the third floor space, I'm convinced that my wife went with the designed part of her brain, and not the practical construction side. Because a sqaure(ish) room is perfect for a first time baseboard installer. Not the mish-mash of closets and intertwining walls. Because, damn....there were TONS of cuts needed. (The design part won out, because the whole house had 2 legitimate closets in 11 rooms prior to the renovation, I admit adding 5 closets in 2 rooms might be a bit lopsided the other way, but you can never have too many closets right? - C)
Anyway, I've added a couple of shots of the baseboards that the boss took. Note that the artsy picture that has my knee pads (EVERYONE needs knee pads when doing baseboards, hardwood install, and tile...PERIOD) I had just placed the two pieces together. So that unsightly gap in the joint isn't really there. I just think that needs to be said for the record.
Really the hard part of the baseboards ended up being the outer mitered joints...obviously. Most of them weren't perfect 45 degrees which is normal. But it's just the shaving off material and trying over and over gets old.
Anyway, tomorrow I'll be adding the base cap to the top of what I've done so far. Honestly, I think that since the main pieces were added and the base cap follows that...it can't be too bad right? I think I totally jinxed everything just with that thought.
I also trimmed out the pocket door frame today and hung the door. The trimming part is about 95% complete with just the "jam" (a ripped 1x8) opposite of the door opening to nail in. Not a big deal. I'll end up priming and painting all of the new door trim when I do the same for the windows and baseboards.
The door has been in our living room SINCE MAY as we had a great thought of using a glass paneled door as our pocket door. It's a full sized door which proved to be a slight issue when actually installing the darn thing. I ended up enlisting the help of the boss and ripping the bottom of the door on the table saw. That made the height perfect, and then just pryed off a 3/8th inch piece added to the side for whatever reason. Totally worked.
I've gotten the thing mounted and now I have to figure out how to get the door to stop swaying back and forth. Of course I have no faith in what our former contractor did, and I can't find the installation instructions to save my life. So it looks like it'll be trial and error. Gee, imagine that.
Funny thing I finally noticed tonight. In the picture above with the door closed, you see three switches next to it in the bedroom. Those are actually the lights for the bathroom...in the bed room space. When I realized this I asked the boss and of course she knew it would be like that. Now, I'm not worried about it, but it's funny that I didn't really think of something like that between the two spaces until there was a door there. Not the wood to tile transition, the door frame...nothing else. Anyway, I found it interesting that I JUST NOW noticed it.
So I guess that's it for today. Not too bad for like 10 hours of work.
Sunday, October 12, 2008
The subtle art of window trim
Today was my part 2 of the window trim work that was long overdue. After creating and installing the sills yesterday, I start out this morning AGAIN watching Tom Silva's trim video. I referred to that in my previous post, so if you haven't seen it and need to do any window trim then you need to watch it. I truly think that if he were to walking into your flooding basement, that he would be able to walk on the water to shut off your water at the meter. He's my Mr. Miyagi.
What I realized about trim today is that all you really need is a fresh 60t blade on your compound saw (especially when your old blade was really used for cutting up demo debris and hardwood flooring), and tons and tons and tons and tons of patience. I was good on the former all day, but the latter started to fade on me after about 5.5 hours of the work today. I won't go into the details, but I'm pretty sure I could be heard yelling some choice words down the block.
In the end I got in the casing trim and installed all of the aprons as well. That's really all there is to it. The tricky parts were in measuring the side pieces to be at least even with each other, and to nails those as straight and flush to the wall as possible. If the nailing isn't flush, then the mitered joint will leave a gap that you will try to work with for ever just to give up anyway with a sigh and that sad feeling of being bested by poplar.
A couple of the windows had that problem from bad drywall, curvy walls, or casing that I had to previously hand plane down (making some high spots along the length). I was able to make the best out of most of those areas, which was a win.
Whatever, this isn't a how to post, because I'm the last person that should be dishing that out in the area of...well...anything. In the end I still need to go back to each window and fill the nail holes.
Side note: I am also on the hunt for a product that I can use to fill 1/8th inch gaps in the trim on some joints. The standard wood fill (at least the Minwax kind I have) is too gritty. I need to find something that is more like a putty. If anyone who read this knows of such a product please don't be shy.
On Tuesday we're getting our baseboard moulding pieces delivered and so I guess next weekend I get to miter for another 12 hours. Only this time on my knees.
After proof-reading this post, I realize it lacks my usual flare for the random thoughts. I think the trim and the dragon slaying yesterday have sapped my strength. Lord knows the celebratory beers at the dragon feast last night didn't help matters. Ugh....
Oh, last thing. Once reason we made our sills so deep is so that the cats can lounge in the windows. It's really the one thing that they seem to enjoy that doesn't involve using clothes or piles of contractor bags as a toilet. So we've encouraged them to lounge and not pee randomly.(I don't think his peeing is random thing myself, I think he knows exactly that contractor bags= loud noises and dirt. Both of which harsh his mellow, so he just wants to make his wishes known- Christina) You'll se my man Marco test driving one of the windows this evening.
Good man. Now learn to use the litter box ALL OF THE TIME!
What I realized about trim today is that all you really need is a fresh 60t blade on your compound saw (especially when your old blade was really used for cutting up demo debris and hardwood flooring), and tons and tons and tons and tons of patience. I was good on the former all day, but the latter started to fade on me after about 5.5 hours of the work today. I won't go into the details, but I'm pretty sure I could be heard yelling some choice words down the block.
In the end I got in the casing trim and installed all of the aprons as well. That's really all there is to it. The tricky parts were in measuring the side pieces to be at least even with each other, and to nails those as straight and flush to the wall as possible. If the nailing isn't flush, then the mitered joint will leave a gap that you will try to work with for ever just to give up anyway with a sigh and that sad feeling of being bested by poplar.
A couple of the windows had that problem from bad drywall, curvy walls, or casing that I had to previously hand plane down (making some high spots along the length). I was able to make the best out of most of those areas, which was a win.
Whatever, this isn't a how to post, because I'm the last person that should be dishing that out in the area of...well...anything. In the end I still need to go back to each window and fill the nail holes.
Side note: I am also on the hunt for a product that I can use to fill 1/8th inch gaps in the trim on some joints. The standard wood fill (at least the Minwax kind I have) is too gritty. I need to find something that is more like a putty. If anyone who read this knows of such a product please don't be shy.
On Tuesday we're getting our baseboard moulding pieces delivered and so I guess next weekend I get to miter for another 12 hours. Only this time on my knees.
After proof-reading this post, I realize it lacks my usual flare for the random thoughts. I think the trim and the dragon slaying yesterday have sapped my strength. Lord knows the celebratory beers at the dragon feast last night didn't help matters. Ugh....
Oh, last thing. Once reason we made our sills so deep is so that the cats can lounge in the windows. It's really the one thing that they seem to enjoy that doesn't involve using clothes or piles of contractor bags as a toilet. So we've encouraged them to lounge and not pee randomly.(I don't think his peeing is random thing myself, I think he knows exactly that contractor bags= loud noises and dirt. Both of which harsh his mellow, so he just wants to make his wishes known- Christina) You'll se my man Marco test driving one of the windows this evening.
Good man. Now learn to use the litter box ALL OF THE TIME!
Saturday, October 11, 2008
Finally slaying the window sill dragon
Hello interwebs people, today was a water shed day for us here in the Grimes house. The "window sill" dragon is now a stinking rotting pile of sawdust. The dragon put up a valiant fight, but in the end it was no match for my measuring tape that was bestowed upon me by the lady of the tool section at the Depot.
Our former contractor walked off of the job after we had a pretty big brewhaha about the window sills. What they installed had structural issues (you could rock them back and forth and they'd bend) as well as a small issue that the two sills in the bedroom did not match the three in the bathroom. I mean the router profiles was totally different and even different materials.
So about 6 weeks ago I tried my first pass at making the sills out of 1x4 and 1x8s (the bedroom windows are fairly shallow whereas the bathroom ones are really deep). I'll refrain for elaborating, but after about 5 tense hours I had failed my mission. And thus the dragon was born.
Fast forward to today, and the fact that we HAVE to get that trim done so painting can wrap up and we can finally move in to the new bedroom. So I have been watching a trim 101 on thisoldhouse.com literally 3-4 times a week for over a month. The link is here, and since Tom Silva can walk on water in any house, his 101 is the trim gospel.
To show you how poorly our new windows were installed, the image on the right is of one of the 5 and it's pretty much what they all looked like. Now, I had pulled out the bad sills and the loose "blocking" but that's it.
After I followed Tom's sage like wisdom, I created all 5 sills in just about 4 hours. 2 are from 1x4 and 3 are 1x8, and since this is a really old house nothing is square. Just because we've gutted and rebuilt this floor doesn't mean that exterior and party walls are magically straight.
The first piece to the install puzzle was to get the sills to be CLOSE to where they needed to be. That meant that I had to basically add blocking or framing where needed to build up the height. the next two pics give you and idea on what I did.
I wound up ripping some 1/2 inch plywood to fit each window's "unique" sizing (in the case of the window in the picture, I had to try and create a level plane on HORRIBLE WINDOW FRAMING). I then added either a ripped 2x3 or a ripped 2x6 fit exactly for each window. That gave me the lower stability that was badly missing from the contractor's attempt at this.
The picture to the left here is what each window ended up looking like when the plywood, 2 by and the sill were finally nailed in (sounds faster than it was). And ignore the horrible look of the drywall around that window, it's another gift from our contractor that I have to fix once the last of the window trim is up.
The next pictures are just of a couple finished windows...one in the bedroom and one in the bathroom. One of the images shows a piece of the trim that we have laying in our living room. It's 4 inches wide so our sills look really long right now.
And lastly Christina took a wide shot coming up the stairs of the bedroom. The banister is still missing the spindles from our floor install, but I'll probably fix that in the next couple of weeks now that I can sleep at night after feasting on the dragon tonight.
(That means beers for the first Flyers game of the season!)
Our former contractor walked off of the job after we had a pretty big brewhaha about the window sills. What they installed had structural issues (you could rock them back and forth and they'd bend) as well as a small issue that the two sills in the bedroom did not match the three in the bathroom. I mean the router profiles was totally different and even different materials.
So about 6 weeks ago I tried my first pass at making the sills out of 1x4 and 1x8s (the bedroom windows are fairly shallow whereas the bathroom ones are really deep). I'll refrain for elaborating, but after about 5 tense hours I had failed my mission. And thus the dragon was born.
Fast forward to today, and the fact that we HAVE to get that trim done so painting can wrap up and we can finally move in to the new bedroom. So I have been watching a trim 101 on thisoldhouse.com literally 3-4 times a week for over a month. The link is here, and since Tom Silva can walk on water in any house, his 101 is the trim gospel.
To show you how poorly our new windows were installed, the image on the right is of one of the 5 and it's pretty much what they all looked like. Now, I had pulled out the bad sills and the loose "blocking" but that's it.
After I followed Tom's sage like wisdom, I created all 5 sills in just about 4 hours. 2 are from 1x4 and 3 are 1x8, and since this is a really old house nothing is square. Just because we've gutted and rebuilt this floor doesn't mean that exterior and party walls are magically straight.
The first piece to the install puzzle was to get the sills to be CLOSE to where they needed to be. That meant that I had to basically add blocking or framing where needed to build up the height. the next two pics give you and idea on what I did.
I wound up ripping some 1/2 inch plywood to fit each window's "unique" sizing (in the case of the window in the picture, I had to try and create a level plane on HORRIBLE WINDOW FRAMING). I then added either a ripped 2x3 or a ripped 2x6 fit exactly for each window. That gave me the lower stability that was badly missing from the contractor's attempt at this.
The picture to the left here is what each window ended up looking like when the plywood, 2 by and the sill were finally nailed in (sounds faster than it was). And ignore the horrible look of the drywall around that window, it's another gift from our contractor that I have to fix once the last of the window trim is up.
The next pictures are just of a couple finished windows...one in the bedroom and one in the bathroom. One of the images shows a piece of the trim that we have laying in our living room. It's 4 inches wide so our sills look really long right now.
And lastly Christina took a wide shot coming up the stairs of the bedroom. The banister is still missing the spindles from our floor install, but I'll probably fix that in the next couple of weeks now that I can sleep at night after feasting on the dragon tonight.
(That means beers for the first Flyers game of the season!)
Tuesday, October 7, 2008
For our second wedding anniversary I give you...
...finished hardwood floors. You're welcome. It was nothing, just a token of my affection for smooth floors that look friggin SWEET.
So I'll recap real fast to keep this post short (there is a "debate" tonight after all). After we installed the floors I got total stage fright about finishing them. I mean if you mess up framing a wall or mitering window casing then you just buy more right? Well what if you sand and seal a floor and screw any of that up? You have to strip and refinish the floors all over again. There really are no do overs. Seeing as how I tend to learn a new project by screwing up a couple of times...I couldn't take that chance.
So we hired out, which is just about the last third party to work on our house in the near future. "So I got that goin' for me, which is nice." ---->
Anyway we had a great guy named Van (http://www.vanshardwoodfloors.com) show up on Thursday for a quote and did the job today. Below are some pictures of the floor as it is right now. In the end we elected to not stain the floors and just have then sanded a bit with 3 coats of poly. The floors are really wet right now and you can see that in the pictures...hey it's a messy job. And also let it be said that the fumes from the job are crazy. Don't underestimate how much the poly smells, and you can even taste it.
The floors will be dry enough to walk on tomorrow, but we'll probably not get up there until the weekend. Then it'll be putting the new bed together up there to get those damn boxes out of my workshop, and the mattress/box spring out of our living room.
It'll be a magical moment. We still need to install the window stools and all of the trim (casing and baseboards) but I think we can start that next week-ish.
On another note, months ago I ripped apart the electrical for the third floor and half of the second. This was in late May before the demo was 100% done. Anyway, over the past weekend I ran new lines up to the second floor and rewired the office/workshop. It was a pain in the butt having to use flashlights at night and not being able to work in there after like 5:00. The picture on the right doesn't look like much, but there was a lot of wiring up there to even get the lights to work. I've added one new outlet right now, and I'll be adding 3 more in the next couple of weeks.
The wire sticking out of the box is for the (to be delivered and installed) recessed lights that are going in the soffit. I'll split the feeder line and that's it.
So yeah, that's about it right now. Today is in fact our second anniversary, and with the house stuff and life things, we both half spaced it until last evening. We're hoping that it's not a harbinger of things to come for the next 70 years.
So you know, my anniversary gift to Christina was completely cleaning out our dump living room and the basement. Things are finally where they need to be and we don't have piles of lumber in the living room. For her part, Christina paid Van for the floor job...so I didn't have to do it. That's a gift I'll take any time. (I was really hoping that wood was the 2nd anniversary gift, turns out that is the 5th, so maybe we got to that one early. Too bad this year was cotton-Christina)
Aint love grand?
So I'll recap real fast to keep this post short (there is a "debate" tonight after all). After we installed the floors I got total stage fright about finishing them. I mean if you mess up framing a wall or mitering window casing then you just buy more right? Well what if you sand and seal a floor and screw any of that up? You have to strip and refinish the floors all over again. There really are no do overs. Seeing as how I tend to learn a new project by screwing up a couple of times...I couldn't take that chance.
So we hired out, which is just about the last third party to work on our house in the near future. "So I got that goin' for me, which is nice." ---->
Anyway we had a great guy named Van (http://www.vanshardwoodfloors.com) show up on Thursday for a quote and did the job today. Below are some pictures of the floor as it is right now. In the end we elected to not stain the floors and just have then sanded a bit with 3 coats of poly. The floors are really wet right now and you can see that in the pictures...hey it's a messy job. And also let it be said that the fumes from the job are crazy. Don't underestimate how much the poly smells, and you can even taste it.
The floors will be dry enough to walk on tomorrow, but we'll probably not get up there until the weekend. Then it'll be putting the new bed together up there to get those damn boxes out of my workshop, and the mattress/box spring out of our living room.
It'll be a magical moment. We still need to install the window stools and all of the trim (casing and baseboards) but I think we can start that next week-ish.
On another note, months ago I ripped apart the electrical for the third floor and half of the second. This was in late May before the demo was 100% done. Anyway, over the past weekend I ran new lines up to the second floor and rewired the office/workshop. It was a pain in the butt having to use flashlights at night and not being able to work in there after like 5:00. The picture on the right doesn't look like much, but there was a lot of wiring up there to even get the lights to work. I've added one new outlet right now, and I'll be adding 3 more in the next couple of weeks.
The wire sticking out of the box is for the (to be delivered and installed) recessed lights that are going in the soffit. I'll split the feeder line and that's it.
So yeah, that's about it right now. Today is in fact our second anniversary, and with the house stuff and life things, we both half spaced it until last evening. We're hoping that it's not a harbinger of things to come for the next 70 years.
So you know, my anniversary gift to Christina was completely cleaning out our dump living room and the basement. Things are finally where they need to be and we don't have piles of lumber in the living room. For her part, Christina paid Van for the floor job...so I didn't have to do it. That's a gift I'll take any time. (I was really hoping that wood was the 2nd anniversary gift, turns out that is the 5th, so maybe we got to that one early. Too bad this year was cotton-Christina)
Aint love grand?
Subscribe to:
Posts (Atom)